Skip to main content
clothink
clothink
  • Design
  • Mockups
  • Tech packs
  • Features
  • Pricing
clothink

Sketches, photoreal mockups and supplier-ready tech packs for apparel, in one workspace.

Product

  • Design & Sketches
  • Mockups
  • Tech Packs
  • All Features
  • Pricing

Resources

  • Blog
  • Tech pack guides
  • Free tools
  • Press
  • Contact Us

Start free

Make your first sketch, mockup and tech pack on the Free plan. No card needed.

Start free

© 2026 Clothink Ltd. All rights reserved.

TermsPrivacy
All topics
What’s newGetting startedLibraryStyles and materialsTech packsCollectionsTeams & sharingBilling & accountAssistant

Styles and materials

Styles, materials, size scales and linking your work to a product.

7 topics

Tech packs — styles, materials, and tech packs

Tech packs in the menu is where one product becomes factory-ready after review. A style is a folder for a single garment (mockups and sketches). A tech pack is the spec sheet inside that style — walked as steps: visuals, materials, size chart, How to Measure, BOM, construction and costing, with the live PDF beside you as you go.

Factories expect a clear, complete tech pack. Keeping it in the same style as your mockups means measurements and images stay matched to the right product.

1. Create a style — one folder per product (for example one jacket).

2. Add a tech pack from that style (one active tech pack per style), then walk the steps or run Auto-Complete.

3. The editor shows a live PDF preview (Split or Preview in the top bar). Auto-Complete can draw How to Measure and numbered call outs on your sketch first.

4. Add Costing, record each fit sample round, and use Check before you send in the Export menu to catch likely mistakes before the pack goes out.

5. Mark a pack as sent to your factory, then follow it from sample to approval in Sample progress.

6. Save fabrics and trims in the material library to reuse on future products.

Planning a full range? Use Collections or Collection brief. New to tech packs? See the Tech packs help category for a step-by-step guide.

Styles

How do I link a mockup to a style?

A style is one product folder (for example one jacket). Linking mockups keeps product photos and factory specs in the same place.

1. Open the style → Mockups tab.

2. Choose Link Existing Mockup to pick from mockups not yet linked to another style, or Generate New Mockup to create one already attached to this style.

You can also start a tech pack from a mockup — tap Create tech pack. If the product type is known, the pack opens in the editor; otherwise you finish the create screen. A style is created for you if needed.

On a team workspace, styles are team work, so linking a mockup to a style shares it with the team automatically. You can link your own mockups and ones already shared with the team. A teammate’s “Only me” mockup can’t be linked.

An outfit mockup (several garments in one shot) can’t be linked to a style or turned into a tech pack. Link, or start from, each garment’s own mockup or sketch.

Styles
How do I create a style?

A style is a folder for one product — for example one jacket. It holds mockups, sketches, and the tech pack for that garment.

1. Open Tech packs → Styles and start a new style. Or, on a mockup or sketch, tap Link a style and choose to make a new style.

2. Enter a style name and product type (season and brand are optional), then press Create Style.

3. Open the style and use the Mockups tab to link existing mockups or generate new ones. When you are ready for factory specs, add a tech pack from the same style — the pack is named for you, and the size scale sits under Tech pack details (choose Change). One style keeps one active pack.

Styles and tech packs are on every plan, including the Free plan (up to 3 active tech packs). In a team workspace they need the workspace to be on a paid plan.

Create style
How do I create a tech pack?

A tech pack is the factory spec sheet for one product. It always lives inside a style.

1. Open + Create → Tech Pack, or start from a style, mockup, or sketch. You can also open a collection’s Line-up tab and choose Open tech pack on a design that has one, or Create tech pack on one that has none.

2. Pick the style the pack is for, or start a new one from a photo, a sketch, or a written description. Naming the product and picking its type creates the style for you. Pack name, status, and size scale are under Tech pack details — choose Change to set them.

3. Press Create. If that style already has a pack, you are sent to the existing one — one active tech pack per style.

Once the editor opens, a blank pack offers Draft this tech pack with Auto-Complete — it does not start on its own. Move through Product visuals, Materials & colours, Size chart, How to Measure, Bill of materials, Construction notes and Costing, with the live PDF preview beside you (Split) or on its own (Preview). Tap Auto-Complete to draft the empty sections; add anything the pictures cannot show, such as fabric or trims, in Notes for the AI. It draws the How to Measure guide and numbered call outs on your sketch; you review and accept before anything is written. You can also type every field by hand. Your edits save themselves.

Create tech packTech pack guide

Brands

What are Brands and how do I use them?

A brand holds the look and voice of a label or customer: its name, logo, colours, tagline and description. Brands are on every plan, including Free. Manage them in Settings → Brands.

Link a brand to a style and it applies to that style’s tech packs. To put the logo and colours on the PDF, turn on Brand branding on PDFs in Pack settings and Custom branding on tech pack PDFs on the brand. Under Pack settings → PDF pages you can also save the brand’s page order as its default.

A brand’s size standard is the size chart you save with Save as brand standard in a tech pack. It lives on the brand’s page under Size standard, and new packs for that brand start from it.

Enhance uses a brand’s tagline and description to write on-brand descriptions. It shows which brand it writes for (for example Enhance for Northline). With one brand there is nothing to pick; with two or more, tap the name to choose another brand or No brand. The brand is only used to write the description. It is not saved on the sketch or mockup.

Brands

Libraries

Material library vs BOM — when to use each

Material library — a reusable catalogue of fabrics, trims, labels, and hardware you use across many products. Save a fabric once, then add it to any tech pack with Import in Materials & colours; trims and labels come in with Import on a BOM section. When you save a change to a library entry that tech packs use, clothink asks whether to update those tech packs. Choose Update to copy the change into them; choose Dismiss and they keep what they had.

BOM (bill of materials) — the list of trims, labels, thread, hardware, and packaging for one garment, inside a tech pack. Add rows yourself, pull from the material library, or tick BOM in the Auto-Complete picker. Fabrics live in Materials & colours.

Rule of thumb: save staples (your core fleece, main label, standard thread) in the material library. The BOM is the per-style shopping list you send to the factory.

For step-by-step BOM and AI order, see the Tech packs help category.

Material library

Topics

What is the difference between a style and a tech pack?

A style is the product folder: name, season, and the mockups and sketches for one garment. A tech pack is the factory document inside that style — size chart, bill of materials (fabrics and trims), construction notes, and the PDF you export. One style keeps one active tech pack (plus colourways for alternate colours).

Why link mockups to a style?

Linking keeps product photos and spec sheets together. When you manage many products, it reduces the risk of sending a factory the wrong mockup with the wrong measurements. See the Styles and materials help category for step-by-step linking.